(click to enlarge) Exceptionally flat, warp-resistant set-up board is the perfect flat reference surface for chassis set-up of 1/8 off-road buggies and truggies. The very stylish and practical board makes the work on any buggy or truggy a pleasure. The board is wide enough to ensure that the setup system pieces will fit properly on the board. A "must have" item for serious racers. (click to enlarge) A flat setup board is a basic yet essential item for proper geometry setup adjustment to ensure precise and accurate measurements. The board is made from a core of specially pressed wooden material, the manufacturing of which ensures constant thickness and warp resistance. The exterior of the flat setup board is a special plastic coating that is bonded to the core by very high pressure, ensuring an extremely flat, tough, and durable exterior. Outer edges are covered with a special plastic material to prevent corner and edge damage from regular or extreme use. The boards exterior may be cleaned with most cleaners though highly-abrasive cleaners are not recommended so as not to mar the fine finish and good looks. (click to enlarge) � exceptionally flat, warp-resistant setup board suitable for setting up 1/8 buggies and truggies � smooth, tough plastic coating is easily cleanable � extra protection on edges � wide enough to fit car and fitted setup system components � comfortable & very precise setup adjustments � a "must have" item for serious racers