To celebrate the TrackStar 1/10th 80A Turbo brushless ESC and Motor receiving ROAR approval, HobbyKing are now introducing the TrackStar ROAR approved 1/10th Stock Class Brushless ESC and Motor Combo set!

The ESC features a CNC alloy case top which incorporates the heatsink for the Mosfets, neat terminal cups for both the battery input and ESC output cables. The ESC software has a large number of user programmable settings such as punch, initial brake, drag brake, boost timing RPM, boost timing, Turbo timing, Turbo delay, Turbo ramp, boost acceleration - allowing thisESC to be customised in nearly every way you could ever need for 1/10 scale on or off road racing!

The motor features a quality CNC alloy motor can, hand-wound high purity copper windings and powerful sintered neodymium magnets, you wont find a better priced motor of this caliber anywhere else! They also feature adjustable timing which allows for fine tuning the performance of your ride while the sensor ensures smooth startups and acceleration.

ESC Specs:
Max Voltage: 2S Lipoly / 6 cell NiMH
Motor limit: 10.5T
Resistance: 0.0004 ohm
Operating current: 80A
Burst Current: 380A
Bec Current: 3A
Bec Voltage: 6V
"Blinky" mode (Non-timing mode): Yes

Programming Options:
Battery Type: Lipoly/NiMH
Operation Mode: Forward/Brake/Reverse; Forward/Brake Only
Initial Brake: 10% ~ 80%
Drake Brake: 0% ~ 30%
Motor Timing: Incremental
Acceleration Punch: 1-9
Forward Limit: 0% ~ 90%
Reverse limit: 10% ~ 100%
Drive Frequency: 8Khz, 16Khz, 24khz
BrakeFrequency: 1,2,4,8,16Khz
Dead Band: 2, 3, 4, 5, 6 
weight: 45g (without cables)
 
Motor Specs:
Can Size: 540
Turns: 17.5
RPM/v: 2270kv
Sensored: Yes (Standard 6 pin harness)
Max voltage: 7.4 (2S)
Max Current: 28A
Max Watts: 190w
Can Diameter: 36mm
Can Length: 53mm
Shaft Size: 3.175mm
Weight: 178g
 
Includes:
ESC x 1
Motor x 1
Sensor wire
TrackStar Sticker
Manual

Now officially approved by ROAR for 17.5 spec stock class race use!