Flashed with newest BlHeli v14.0.0.3 (9.2015) firmware installed and tested! We get Factory Direct. All of the units shipped are manufactured 8/26/2015 They are ready to ship, ESC only orders will ship in less then 24 hours. The date code are 9.2015 (September) Date code . Every unit tested under load, and solder visually inspected.
ESC Features:
Specially for Multi-copter, throttle respond fast;
Suit for throttle, which can compatible well with motor;
Throttle signal is twisted pair cable, reduce the crosstalk while the signal transfer by the copper wire and flight more stable;
The maximum refresh frequency up to 500Hz throttle signal, compatible with all flight controls;
Use new process ultra-low resistance MOSFET with miniaturization, and all flashes are N MOS with high withstanding current;
Minaturization design, Mini16/20A with high performance capacitor fliter on the board, weight reduce to 2g, also already thicken the PCB copper specially and low heat for small aircraft.
Enable Racing Mode! (Dampened Light Supported)
Settings are changed/tuned for better handing during Racing! : PWM Frequency/Damped, Motor Timing, Beacon strength/Delay,PPM MIN/MAX Throttle are set to maximum performance! Pair with a Flip32 for automatic detection of all the advantages of Oneshot123
- Specification:
- BlHeli pre-flashed 14.0.0.2
- Damped Light Ready; Oneshot Ready
- Oneshot Ready (plug and play with flip32)
- Small (kiss size) (only 2 grams without wires)
- Up to 600Hz signal
- ultra-low resistance all MOSFET design
- BLHeli or simonK bootloader enabled
- Flashable via the servo leads
- Voltage: 6-16.8V(2-4S LiPo)
- Output Current: 20A
- BEC: Without
- Signal frequency: 20-500Hz
- Output PWM frequency：18KHz
- Firmware：BLHELI-(ONESHOT)
- Weight：2.0g(without wires)
- Size：23*12*4.5mm