![](http://team-james.com/Upload/DEditor/product/20170920183148.jpg)
![](http://team-james.com/Upload/DEditor/product/20170920183149.jpg)
![](http://team-james.com/Upload/DEditor/product/20170920183152.jpg)
![](http://team-james.com/Upload/DEditor/product/20170920183154.jpg)
Accessories: 3x14 Stainless button head screw - 10pcs 3x14 Stainless
flat head screw - 2pcs 3x20 Stainless button head screw - 4pcs 5.8x7.5
Ball Ends -4 pcs
1. This set of steering tie rods is easy to install onto
the 1/10 E-Revo, Summit, Revo, E-Revo 3.3, 1/10Electric and Nitro Car
2.
This tie rod is thicker than the original thin rod making them stronger 3.
The tie rod¡¯s thread size is 4mm and it allows clockwise and anti-clockwise
adjustment of the thread 4. The tie rods are easy to adjust by the design of
the rod body with a center adjustment tool on every one of them 5. The black
ball ends are made in good quality of plastic so not to be as rigid and allow
some ¡°give¡± The ball screws are already installed for smooth turning ¡¦ the base
material for these tie rods is a high quality light weight high tensile strength
aluminum 6061 T6 and is then anodized with scratch resistant colors 6.The
purpose to add the 4 pieces ball ends is for replacing and adjusting the length
of the tie rods to offer more options of setting suitable for different usages.
The long ball end being installed onto the tie rods is suitable for onroad
track of speedy driving. The 4 shorter ball ends being installed onto the
tie rods are more suitable for rally low-lying
landscape.
|