Expanding on the Fusion line of helicopters, the Blade Fusion 360 redefines PNP performance in a 300-sized machine. With the popular 360 size, Blade has taken a fresh approach in redeveloping the Fusion 360 by adding high-end hardware, all carbon fiber and aluminum construction, improved power system package, and more.

Cutting-edge Spektrum technology is featured throughout this beast from new Spektrum 3055 & 3065 servos with Optimized Servo Geometry to the new ground-breaking Spektrum 6250 HX flybarless system. This new flybarless controller features advanced adaptive flight control algorithms, forward programming, 6-axis M.E.M.S. inertial sensor, low-latency high-speed operation, two remote receiver ports for diversity, and a vibration rejecting aluminum lower case.

Pre-installed and pre-programmed in the Fusion 360 is a HobbyWing 60A Platinum ESC ready for 6S power. The 2221-1800Kv brushless outrunner motor delivers impressive headspeeds via the helical main gear for a powerful and efficient punch that's unlike anything else in this size from Blade. The new all carbon fiber and aluminum design takes frame rigidity to another level for a rock solid flight experience. The new carbon fiber main rotor blades feature an improved aerodynamic design with increases to efficiency and power. A new oversized tail boom eliminates the need for boom supports and is crowned by a new CNC aluminum tail case improving vibration damping and performance. All this combines to give pilots one of the best flying Blade models to date!

Features:

• PNP Basic Convenience
• 2221 - 1800Kv Brushless Outrunner Motor
• 6S Power System Provides Ballistic 3D Performance
• Hobbywing 60A Platinum ESC With New IC3 Connector
• Spektrum 3055 and 3065 Servos
• Optimized Servo Geometry
• Fiberglass Canopy and Painted Tail Fin
• Carbon Fiber Landing Gear
• Optimized and Lightened Main Frame
• Forward Programming
• CNC Main Blade Grips
• Stunning Black Anodized Hardware
• Large Tail Boom and New CNC Tail Case
• High Visibility Fin and Trim Scheme
• Improved Main Rotor Blade Design

What's in the Box:

• (1) Factory Assembled Blade Fusion 360 helicopter with:
• (1) 350mm Carbon Fiber Main Rotor Blade
• (2) 65mm Composite Plastic Tail Rotor Blades
• (1) Spektrum 6250HX Flybarless Flight Controller
• (1) Brushless Outrunner Motor, 1800Kv
• (1) Brushless 60A ESC
• (3) Sub-Micro Digital Metal Geared Heli Cyclic Servos
• (1) Sub-Micro Digital Metal Geared Heli MG Servo
• (1) Product Manual

Needed To Complete:

• (1) Transmitter And Receiver
• (Not required; Optional) Gen2 or iX12 required for Telemetry and Forward Programming Features
• (1+) 22.2V 6S 1300-1800mAh 30C LiPo Flight Battery w/EC3/iC3 Connector
• (1) Suitable LiPo Balancing Charger

6S Power House

Pre-installed and pre-programmed in the Fusion 360 is a HobbyWing 60A Platinum ESC ready for 6S power. The 2221-1800Kv brushless outrunner motor delivers impressive head speeds via the helical main gear for a powerful and efficient punch that's unlike anything else in this size from Blade. The heli also accepts a wide range of 22.2v 6S Lipo batteries from 1300 to 1800mah.

Optimized Fusion Design

The new all carbon fiber and aluminum design takes frame rigidity to another level for a rock solid flight experience. The new carbon fiber main rotor blades feature an improved aerodynamic design with increases to efficiency and power. A new oversized tail boom eliminates the need for boom supports and is crowned by a new CNC aluminum tail case improving vibration damping and performance.

Aggressive and Attractive Trim Scheme

The Fusion 360 features a expertly painted fiberglass canopy and matching tail fin that is both attractive and purposeful. The bright color scheme is easy to see when tearing up the sky and is sure to catch the eye of everyone at the flight line.