![](http://team-james.com/Upload/DEditor/product/20190716104116.jpg)
This
is the Hobbywing XR10 Pro G2 Sensored Brushless ESC and 21.5T Bandit Motor
Combo.
The
Hobbywing Xerun Bandit G2 series is the perfect combination of high quality
materials and exquisite craftsmanship. It provides the performance advantage all
power-hungry racers are looking for, while only the minimum maintenance is
required. The XR10 Pro G2 Sensored Brushless ESC features an upgraded 32-bit M4
microprocessor with more powerful processing capability and Reverse Polarity
Protection.
Features:
- ESC:
- Upgraded
32-bit M4 microprocessor with more powerful processing capability guarantees
stable control and rapid response. (Industry's highest 32-bit microprocessor,
increased processing speed by X4)
- Peak
current up to 1200A. (this is not a typo)
- Built-in
switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to
7.4V (step: 0.1V) for usage with servos & other devices require
different voltages.
- Variable
frequency regulation of PWM & brake frequencies allows users to
precisely regulate the driving; braking forces (of the motors).
- Expanded
range of the max. brake force brings in the active brake ranges from 101% to
150%.
- Softening
function (HOBBYWING-initiated) for milder or wilder driving control and better
driving efficiency.
- 10
select-to-use profiles applicable to all 1/10th RC car racing.
- Internal
electronic key switch for long service life, high reliability; and the external
switch port for connecting an external switch (included in the product box) is
applicable to different situations.
- Separate
PRG/FAN port is able to power an external fan for maximize cooling performance
or connect a LCD program box or WiFi module to the ESC.
- With
the Updated WIFI express module (purchase separately), users are able to program
parameters, upgrade firmware and check relevant data during the event using
either the iPhone or Android devices.
- Switchable
motor direction (CCW/CW) for various chassis.
- Multiple
protections comes in standard
- Low-voltage
cutoff protection
- ESC
and motor thermal protection
- Fail
safe (throttle signal loss protection)
- Reverse
polarity protection
- Data
logging for recording the maximum ESC/motor temperature, motor speed/RPM, and
others in real time.
- Firmware
upgrade via Hobbywing multi-function LCD program box or WiFi Express (item sold
separately).
- Motor:
- Specially
designed for high-level racing.
- Lightweight:
The G3 Modified & Stock motors only weigh 161g & 132g respectively, the
weights are reduced by 11% & 21% when comparing with the V10 G2 motors.
- The
built-in high precision Hall sensor combined with the high precision and
balanced rotor guarantee outstanding linearity of the motor.
- The
mechanical timing can be adjusted finely and smoothly; the skid-proof lines on
the rear end plate of the motor guarantee stability of the timing after
adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30
degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable
from 20 degrees to 50 degrees.
- The
motor case is designed to be easy to dismantle for maintenance purposes and for
the replacement of common wearing parts.
- The
special shell design which makes the stator core expose to the air maximizes
cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce
heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or
dirt from getting inside and damaging the motor(s).
- The
use of high-performance stator core, heat (200¡ÆC) resistant wire, heat (200¡ÆC)
resistant rotor with strong structure, imported high precision and high strength
bearings, and copper solder tabs with super current endurance guarantees
outstanding performance and super durability.
Specifications:
- ESC:
- Cont./Peak
Current: 160A / Burst: 1200A
- Battery:
5-6 cells NiMH/NiCd / 2S LiPo
- BEC
Output: 5V-7.4V
- Motor
Supported: Sensored and sensorless brushless motors
- Suitable
Motor: 3650 Motors 1/10th Touring Car¡Ã4.5T, 1/10th Buggy ¡Ã 5.5T
- Application:
Brushless motor system for 1/10th, 1/12th Touring Cars & Buggies
Racing, Splash proof
- Wires:
Standard 12AWG 200mm
- Size:
37.5X30.9X32.5mm
- Weight:
95g
- Motor:
- kV
Without Load (RPM/V): 1900
- Resistance:
0.0535 Ohm
- Current
Without Load (A): 1.8
- Max.
Output Power* (W): 155
- Current
@Max Output Power (A): 42
- Motor
Diameter x Length: 36x52.5mm
- Shaft
Diameter x Length: 3.175x14.6mm
- Pole:
2
- Weight:
188g
- Application:
1/10 TC & F1 stock racing
*The
"Max. Output Power" is measured with 7.4V input voltage and ESC at ZERO timing.
This parameter is neither the ¡°maximum input power¡± nor the ¡°rating power¡±, it
is calculated by ¡°RPM x Torque / 9550¡±
|