1
Specification
1.1 Output: Continuous 60A, Burst 80A up to 10
Secs.
1.2 Input Voltage: 2-6 cells lithium battery or
5-18 cells NiCd/NIMh battery. 1.3 BEC: Pentium-60A: 3A / 5V (Switch mode).
Pentium-60A-OPTO: None.
1.4 Max Speed: 210,000rpm for 2 Poles BLM,
70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor)
1.5 Size: 70mm (L) * 31mm (W) * 14mm (H).
1.6 Weight: Pentium-60A: 60g. Pentium-60A-OPTO:
56g.
2
Features
2.1 Safety Arming Feature: Regardless the throttle
stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be
configured to provide best throttle linearity, fully compatible with all market
available transmitters.
2.3 Programmable Items: Brake Setting: brake
enabled / brake disabled. Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or
NiCd). Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output
power / Cutoff the output power. Low Voltage Cutoff Protection Threshold (Cutoff
Threshold): low / medium / high. Start Mode: normal / soft / very soft. Timing:
low / medium / high. Reset: reset all the programmable items to its default
setting.
2.4 Full Protection Features: Low voltage cutoff
protection / over-heat protection / throttle signal lost
protection.
3
Advantages
3.1 Military standard capacitor with extreme low
resistance is used at voltage input section, this will increase the ability of
prevention of unwanted RF Noise/ Interference during flying.
3.2 Extreme low resistance PCB is used at power
output section to get the best current endurance capability.
3.3 Big heat sink has a very good cooling effect.
3.4 Microprocessor uses separate voltage regulator
IC, with good anti-jamming capability
3.5 Compatible with Hobbywing's Program Card.
3.6 Intellectual property rights of our
own.
.
***********************************************************************************************************************