(카펫용) JConcepts Fuzz Bite LP Carpet 2.2" 2WD Front Buggy Tires (2) (Pink)
(카펫용) JConcepts Pin Swag Carpet 2.2" Rear Buggy Tires (2) (Pink)
The team at JConcepts are always innovating and adding to an arsenal of fine racing tread patterns and compounds. The carpet and turf racing scene are hotter than ever, and with more courses, the team works harder than ever to deliver more options to a hungry crowd of racers. Introducing the Fuzz Bite, the 2wd front pin tire designed into radius positioning to enhance the drive on a range of surfaces. The Fuzz Bite front tire lands on a super low-profile carcass. The super low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.   The alternating rows of pins provides side-bite, increased steering response and the tightness of the package creates a nimble racing vehicle. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also additional mid-corner steering. A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on a wheel which lead to a great alignment but now with reduced un-sprung weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to. The super low-profile tires do not require foam inserts. The 2.2” bead mounting diameter fits to popular slim wheels like the #3376 Mono wheels available in bright white and florescent yellow. Features: |
Like the name suggests, the Pin Swag tire combines the outer lugs of a JConcepts front tire with the dense arrangement of Pin Down type pins. The pins themselves are round and crisp to the top where they peak out to a point. Near the sidewall, the Swag enters with a smooth transition and drops off to a ledge. The Swag is split down the center to give a little individual control to contort to surfaces. In between, a stagger section with angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass. An already low-profile carcass rolls through the turns and transitions well at high and low speeds.   A unique feature on the Pin Swag is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
The JConcepts tires include open cell, medium inserts for plush control. The 2.2” bead mounting diameter fit to popular wheels like the #3348 Mono wheels available in bright white and florescent yellow. Features: |
