This is the Tekin RX8 and Redline T8 1/8th Scale Buggy Competition Brushless ESC/Motor Combo (2650kV). Tekin’s RX8 is big power in a small package. Based off of the proven RS series Speed Control the RX8 takes large scale current demands in stride. Leading the industry not only in power handling ability but size and features with Drag Brake, Neutral width, Throttle Profiles, Voltage Cut Offs for Lipos and much more. The RX8 sits at only 1.5 x 2.22 x 1.46, a small foot print making it easy to install on any chassis. Don’t negotiate the track, attack it with extreme prejudice.

Tekin’s Redline T8 motor series is designed for large scale, high performance competition. Featuring sensors for flawless, reliable on track operation, the T8 provides pro level control and power. Capable of both sensored and sensorless operation, the T8 series motors are the leading edge of large scale RC motor technology. Utilize the torque and speed of your T8 to propel you across the finish line.

Couple the Redline T8 with Tekin’s RX8 Electronic Speed Control and harness the industrys leading technologies in a complete Tekin power system solution.

RX8 Features

  • Easily Access Programming, Anywhere, Anytime
  • Drives Sensor/Sensorless Brushless and Brushed Motors
  • D2: Dual Drive Mode Technology
  • On-Board Temperature Indicator
  • PC Interface for Custom Programming
  • HDAC: High Density Copper Fet Boards
  • Sensor Plug for Precise Commutation with all Motors
  • Solder Posts for Easy Wire Replacement
  • Self Test Diagnostics and Factory Reset
  • Adjustable Drag Brakes
  • RS-232 Digital Communications Protocol
  • Pit Tune Mode
  • DGF2: Digital Glitch Filtering V2
  • QuickTune™ Programming
  • One-Touch Radio Calibration

Programming Features

  • Brake / Reverse Strength (13 steps)
  • Current Limiter (none + 12 steps)
  • Neutral Width (7 steps)
  • Throttle Profiles (7 choices)
  • Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
  • Voltage Cutoffs (none, 2s, 3s, 4s, 6s, Custom)
  • Timing Advance when used with Tekin Hotwire
  • Extensive Tuning via Tekin HotWire PC Interface (sold separately)

Redline T8 Features

  • CNC Machined 6061 T6 Billet aluminum Ribbed Heatsink Can
  • Sensored and Sensorless operation.
  • High Current Solder Tabs
  • Rebuildable Design
  • Neodymium Sintered Magnet
  • Precision Engineered for Maximum Energy Conversion
  • Dual-Plug Sensor Wire Harness

RX8 Specifications
Controls: Forward/Brake/Reverse
Input Voltage: up to 6S Lipo
Continuous Current: 210 Amps*
BEC: 6.0V/5.0A
Motor Limit Brushless Mode: No Limit
Motor Limit Brushed Fwd Only Mode: No Limit
Motor Limit Brushed Fwd/Rev Mode: No Limit
Throttle Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.5 x 2.2 x 1.4"
Weight Approx: 2.7oz

T8 Specifications:
KV Rating: 2650
Weight: 11.5oz (341g)
Shaft Dimensions: 19 x 5mm w/flat
Motor Diameter: 1.57” (40mm) / 1.65” (42mm) including fin
Motor Length: 2.80” (71mm)