FUT0509152 Futaba S9152 Digital Mega High Torque Servo

T.O.C급 대형기체에 최적. 니카드전용.하이토크타입. 러더,엘리베이터에 사용 권장.

This is the Futaba S9152 Mega High Torque Digital Rudder Servo.
                 Comes with "J" Connector Pre-Installed.

SPECS:    Speed:  .23 sec/60° @ 4.8V
                  .19 sec/60° @ 6.0V
          Torque: 222 oz-in (16.0kg/cm) @ 4.8V
                  278 oz-in (20.0kg/cm) @ 6V
          Weight: 3.0oz  (85g)
          Dimensions: 1.9 x 1.0 x 1.6" (49 x 25 x 40mm)
          Output Shaft Diameter: 8mm
          Distance between mounting hole centers same side:      .55"   (14mm)
          Distance between mounting hole centers opposite side: 2.35" (59.6mm)

COMMENTS: S9152 Digital Servo Precautions,
          -It is best to avoid long leads and Y-harnesses especially with
           standard grade wires. If problems are encountered, consider using
           heavy duty wire such as Futaba's Heavy Duty Series or Hobbico's
           Pro Series,minimizing lead lengths, and/or removing Y-harnesses.
           -Current Drain: Futaba S9152 Servo is Specially Designed for High-
            Torque and High-Speed, Therefore Very High Current Drain Is
            Normal At Startup. For Ultimate Performance When Using This Servo
            Please Review The Following Points.
            (1) When Using Systems With the Battery Fail Safe Function it Has
              a Higher Cut-Off Voltage Setting Which Will Cause Shorter
              Operation Time.
            (2) When Installing the Servo Please Check Pushrod Linkage To Make
              Sure There Is No Binding in Order To Prevent Excessive Power
              Consumption and Decrease the Life of the Motor and Battery.
         This digital servo cannot be used with the following * AM *
               transmitters as the servo neutral signal is: 1310us).
        CONQUEST AM, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), New Terratop,
              T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK series.