AAK7023 1/10 Scale 전동트럭 RC10T4.1 Factory Team
RC10T4.1 Factory Team
7-Time R.O.A.R. National Champion!
Since its release in 2003, the RC10T4 remains undefeated on a national level, having won seven consecutive ROAR National Championships. Driven by this continuing success, our designers in Area 51 spent countless hours refining the T4 to meet the demands of today�s LiPo batteries and brushless motors. The RC10T4.1 Factory Team kit is the product of all this effort.
The T4.1 Factory Team kit comes armed with Factory Team aluminum rear hubs, V2 slipper, Hi-Flow T4 body, and optimized suspension setup to help you quickly master any track!
Since its release in 2003, the RC10T4 remains undefeated on a national level, having won seven consecutive ROAR National Championships. Driven by this continuing success, our designers in Area 51 spent countless hours refining the T4 to meet the demands of today�s LiPo batteries and brushless motors. The RC10T4.1 Factory Team kit is the product of all this effort.
The T4.1 Factory Team kit comes armed with Factory Team aluminum rear hubs, V2 slipper, Hi-Flow T4 body, and optimized suspension setup to help you quickly master any track!
Vehicle Specifications
| Power Source: | Electric |
| Terrain: | Off-Road |
| Body Style: | Truck |
| Scale Size: | 1:10 Scale |
| Assembly Level: | Kit* |
| Length: | 390mm (15.35in) |
| Width: | 316mm (12.44in) |
| Wheelbase: | 288mm (11.34in) |
| Weight: | 1756g (3.87 lbs) |
| Internal Gear Ratio: |
2.6:1 |
| Drive: | 2WD |
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.
Required to Complete
- R/C 2-channel surface frequency radio system
- Battery pack
- Battery charger
- Electronic speed control
- R/C electric motor
- Pinion gear
- Paint for the body
- Glue for tire and wheels
Features
- Factory Team 0.5� aluminum rear hubs with oversized outer bearing
- Ball differential with lightweight outdrives
- Factory Team V2 hard-anodized threaded shock bodies with bleed-screw caps
- V2 slipper assembly with high-rate spring for more consistent slipper clutch adjustments
- JConcepts Hi-Flow T4 body
- JConcepts Double-Dees rear tires in green compound and Carvers front tires in blue compound
- CVA joints with pin retainer clips
- Carbon-fiber battery strap with blue aluminum thumb screws
- Blue titanium turnbuckles
- Optimized suspension setup for use with LiPo batteries
- Suspension mounts for 4.0�, 3.5�, 3.0�, and 2.5� rear toe included
- Complete set of precision ball bearings
- Factory Team blue aluminum hinge pin brace, milled motor plate, servo mounts ... and much more!
