KY30508MS 1/24 R/C EP FORMULA CAR MINI-Z RACER FORMULA CAR (Loaded with RA-4B FET)

 

Ferrari 248 F1 No.5

 

SP Limited (without Transmitter)

 

 

Formula machine packed with special features for extra speed and without transmitter.
The one and only palmtop racing machine with both performance and ultra-real styling.

With a chassis only 182mm long, who could believe an advanced R/C Formula-1 racer like this could fit on the palm of your hand! Featuring a high-frequency FET speed controller that delivers powerful yet sensitive traction control and brake function, as well as providing precise steering response that allows drivers to show all their skills. Only four AAA-size alkaline batteries are needed to provide about 1 hour run time and a huge range of optional parts and Officially-licensed bodies and color schemes bring out the excitement of real F-1 racing. The SP Limited version also includes special racing parts for drivers on a quest for ever more speed. Packaged without transmitter, the SP Limited makes an ideal 2nd or 3rd machine for your high-performance lineup.

 

King-pin and coil suspension system delivers both racy control characteristics and blistering speed.

   

Rear suspension features special coil and twin arm swing system for superior surface tracing and controlled traction.

    

Equipped with bevel-type differential gears to deliver stable cornering. Includes selection of 4 different pinion gears so settings can be changed to match racing conditions.

 

Smooth steering control is realized with the high resolution steering servo. Mass concentration from the one-piece structure contributes to superior maneuverability.

    

Includes pre-installed FET amp with brake function. Produces powerful drive from the motor and minimizes loss with smooth acceleration. Also features braking function.

    

Finished in the finest detail down to the graphics on each driver helmet. Wing design and underside of the body are also recreated with great care.


Full ball bearing specifications for high-efficiency.
Total of seven ball bearings are equipped through the drive train. Represents 2,520 Yen of value (if purchased separately). 		X-SPEED Mini-Z Motor V.
Equipped with high powered X-SPEED Mini-Z Motor V.
Aluminum motor mount also provides heat sink function.
Hard anodized in vivid gold. Scratch resistant and provides effective heat dissipation. 		Pre-balanced high-grip tires.
These expensive high-grip tires previously included in the SP version, are now included as standard. The tires are pre-balanced for the front and rear to support faster lap times!
Even more power and performance!

The low center of gravity Formula chassis is boosted with the addition of the RA-4B FET motor control amp. One-piece unit including receiver and high-power amp delivers sharp pick up and higher maximum speed.
 

Having lost its world title after six years at the top of Formula 1, Ferrari갽s hopes to recover its crown in 2006 were placed on the 248. Loaded with its signature 2400cc V8 engine, Ferrari took the championship down to the wire, only to be edged out in the last race. The significance of that year갽s campaign was equipped on cars No.5 and No.6.

걙 Readyset Contents 걚

  • Fully factory assembled chassis with R/C system (with brake & reverse) and linkages installed.
  • Pre-painted plastic body complete with graphics
  • Pinion Gears - 4 types
  • Removable clear bumper
  • Wheel Wrench

걙 Required for operation 걚

  • Transmitter
  • AA-sized batteries x 8 for transmitter
  • AAA-sized batteries (alkaline or Ni-MH) x 4 for chassis
Chassis Technical Data
Length
 182mm
Width
 82mm
Wheelbase
 130mm
Tread (F/R)
 68?66mm
Tire(F/R)
 꺭27?14mm?꺭27?16mm
Weight
 190g (approx.)
Motor
 130-Class