The RC8Be Factory Team kit picks up where the RC8e left off by including many performance and durability enhancing features that were pioneered by Team Associated's Area 51 engineers and world-class team of pro drivers.

The RC8Be features include many Factory Team parts, as well as pre-assembled shocks, differentials, and turnbuckles to help get you on the track fast! This kit also includes Factory Team shock and diff fluids! All of these refinements are what make the Factory Team RC8Be뾞 potent buggy ready to take your racing to the next level!

Features:

  • Pre-assembled shocks, diffs, and turnbuckles with Factory Team shock and diff fluids included
  • Factory Team 16mm Big Bore threaded hard-anodized shocks feature heavy-duty 4mm TiN-coated stainless steel shock shafts for maximum smoothness
  • Updated 5mm 7075 blue aluminum shock towers allow the driver to stand the shock angle up for a more aggressive suspension
  • Optimized front upper camber link bushings allow for easier tuning and maintenance
  • 7075 blue aluminum suspension mounts front and rear
  • Molded bushings allow for easy and quick adjustment of rear toe-in, rear anti-squat, and front kick-up
  • Optimized steering geometry for more consistency and reduced bump steer
  • Updated wing mount with additional clearance for 16mm shocks
  • Molded battery tray supports two R.O.A.R. approved 1:10 scale size 7.4v LiPo battery packs with room for foam pads
  • Factory Team 83mm wheels, & Pro-Line M3 Holeshot Tires with molded inserts included
  • 4.30:1 ratio gearboxes for maximum punch
  • Two-piece split-center diff mount allows quick and easy access to the center diff
  • Caster blocks adjust 14? 16? or 18?with molded inserts
  • 3.5mm light CVA drivetrain with full ball bearings
  • Rear molded CVA boots to keep dirt and mud out of rear joints
  • Blue aluminum hexes and nylon locking wheel nuts
  • Tough steel-alloy shock stand-offs

Specifications:
Scale: 1:8
Power: Electric
Length: 470mm
Width: 305mm
Weight: 3570g*
Wheelbase: 323mm
Internal Gear Ratio: 4.30:1
Drive: 4WD
Tire Type: Pro-Line M3 Holeshots
Kit/RTR: Kit
Body: Unpainted
*Actual weight will vary depending on the equipment used.

Needed To Complete:

  • 2+ Channel Transmitter and Receiver
  • 1 or 2 6-Cell NiMH (7.4V) OR 1 or 2 2-Cell LiPo (up to 14.8V, depending on ESC compatibility) Battery Packs and compatible Battery Charger
  • Electronic Speed Control
  • Electric Motor
  • Tire adhesive
  • Paint for Lexan body
  • Tools: Phillips screwdriver, needle nose pliers, pencil-type soldering iron with Rosin core solder to solder motor wires, thread-locking compound, hobby knife, precision ruler, body scissors