|
Thunder Tiger MTA-4 S28 엔진몬스터트럭 2.4GHz RTR - Blue
리코일스타터타입
|
| Wheelbase(mm / in.) |
14.5"(368mm) |
|---|---|
| Weight(g/ lbs.) |
12 Ibs.(5443 g.) |
| Length(mm / in.) |
22.0"(558mm) |
| Width(mm / in.) |
17.2"(438mm) |
| Height(mm / in.) |
10.7"(273mm) |
| Ground Clearance(mm / in.) |
4.25"(108mm) |
| Drive train/Pulley ratio |
|
| Motor |
|
| Enigine |
PRO-28BD-R |
Content
RTR Contents Fully factory assembled chassis with complete ACE RC COUGAR 3CH 2.4GHZ R/C system installed. Thunder Tiger PRO-28 dual start engine mounted. Pre-cut body with complete painting and decals applied. Batteries not included.
Introduction
Massive, Tough, and Agile The 4WD MTA-4 S28 is a Rottweiler on wheels. No terrain is too challenging for this power crazed "Ready to Run 1:8 scale truck. Just slam open the throttle, and the S28 turns tough terrain into minced meat. This is one truck you won't be able to put down !
(This item is not available in North America)（Not recommended for use without adult supervision）
Features
Features:
1. Super brutal Pro-28 (4.6cc)size engine that has two different starting methods (pull start and hex shaft start).
2. A very rigid, extruded aluminum channel chassis was used to handle the stress of the long travel suspension and high power of the .28 size engine.
3. Reliable, two-speed, adjustable automatic shifting, forward and reverse transmission.
4.Long travel suspension is controlled by 8 adjustable oil damped shocks which handle jump heights in excess of 2 meter.
5.One piece electronic equipment container unit.
6.The large capacity fuel tank enables longer operation.
7.Fuel line with primer pump.
8.High impact absorbing front and rear bumpers protect the chassis and suspension during hard landings and tumbles.
9.Realistic styled body shell, wheels and tires match the design of full size monster trucks.
10.Easy & quickly body open system. Features of Pro-28BD-R: Thunder Tiger Pro-28BD-R Engine with the unique MTA Dual-Start system: Convenient pull start or hex-shaft/drill start combined in one unit! Large-bore aluminum-bodied carburetor and two-stage foam element air filter. 7075 T-6 connecting rod. Fan-type flywheel provides additional cooling.