Prebuilt of balsa, ply and aluminum, the center wing section is a masterpiece of ease and engineering.

The Corsair’s trademark “gull” shape is reproduced at the factory, eliminating hours of building work. Reinforced mounts for Robart® retractable landing gear are built into the inner wing panel. That way, the main gear remain in place when outer panels are moved, and provide an easy way to “walk” the fuselage to and from the field. The prehinged flaps on the center section and outer panel are linked with a phenolic tab. Once linked, the flaps in both panels work as one surface and require only one servo in each wing half. The flaps, ailerons and elevators are prehinged to reduce build time.

Hidden mounting screws secure the painted fiberglass cowl, leaving the scale outline clean and untouched. Details include molded-in panel and flap lines on the cowl, plus a replica radial complete with pushrod tubes and spark plug wires. A 2-piece aluminum spinner hub — usually an expensive aftermarket extra — is included, for extra value and enhanced appearance.		The Corsair’s cockpit interior includes a detailed instrument panel with recessed gauges. Add the pilot figure of your choice and you’re ready for action.
A removable fiberglass tail cone fairing offers effortless scale looks and easy access to tail control linkages.		Scale pluses also include strut covers for the main gear, tailwheel doors that open and close and wheels for both.
The Corsair is fully sheeted, with flat finish MonoKote and painted fiberglass parts to create a seamless scale appearance. Matte finish decals add authentic markings and insignia.		The radio compartment has ample room for the radio and retract gear, as well as the hands that install them.
The cowl is easily removable and offers ample room for many 50-55 cc gas engines and mufflers.

RECOMMENDED PRODUCTS:

FUTk9275 Futaba® 12FGA 12-Channel FASST™ Computer Radio System
FUTM0045 (8) Futaba S3305 High-Torque Standard Servo w/Metal Gears
FUTM0027 (3) Futaba S3004 Standard Ball Bearing Servos (FUTM0027)
DLEG0055 DLE™ Engines DLE-55cc Gas Engine
JTCG1035 J'TEC Radiowave Muffler TF P51/Giant P47/DA/DLE 50/55
ROBQ1655 Robart® Main Gear for the Top Flite Giant-Scale F4U Corsair
ROBQ2230 Robart Pneumatic Forked Tailwheel Retract
ROBQ2305 Robart Large-Scale Deluxe Air Control Kit
ROBQ2369 Robart High-Pressure Air Tubing 10’
HCAM2721 (4) Hobbico® Pro Series™ 24” (610 mm) Heavy-Duty Servo Extensions (for ailerons & flaps)
HCAM2701 (2) Hobbico® Pro Series 6” (150 mm) Heavy-Duty Servo Extensions
FUTM4385 (2) Futaba Heavy-Duty Switch Harnesses
FUTM2120 (2) Futaba 1” Aluminum Servo Arms (Silver)
ERNM3001 (2) Ernst Charge Receptacles

Please note: all recommendations were the best choices available at the time of product release. Please check with your dealer for additional choices.